1/12. Respiratory illness in workers exposed to metalworking fluid contaminated with nontuberculous mycobacteria--ohio, 2001.In January 2001, three machinists at an automobile brake manufacturing facility in ohio (plant A) were hospitalized with respiratory illness characterized by dyspnea, cough, fatigue, weight loss, hypoxia, and pulmonary infiltrates. hypersensitivity pneumonitis (HP) was diagnosed in all three workers. In March 2001, additional employees began seeking medical attention for respiratory and systemic symptoms. In May 2001, union and management representatives requested assistance from CDC's National Institute for Occupational safety and Health (NIOSH) in determining the cause of the illnesses and preventing further illness in employees. This report describes two case reports and the preliminary results of the ongoing investigation, which found that exposure to aerosolized nontuberculous mycobacteria (NTM) might be contributing to the observed respiratory illnesses in this manufacturing facility. Clinicians and public health professionals should be alert to the variable presentation of occupational respiratory disease that might occur in workers in the machining industry.- - - - - - - - - - ranking = 1keywords = plant (Clic here for more details about this article) |
2/12. hypersensitivity pneumonitis in a hardwood processing plant related to heavy mold exposure.Two workers employed in a hardwood floor plant presented symptoms suggestive of hypersensitivity pneumonitis (HP). At that plant, kiln-dried wood often shows moldy growth and is subsequently brought inside for processing. This study evaluated the environment in attempt to identify the causative antigen and verify whether other workers of this and similar plants had or were at risk of developing HP. Dust from dust-removing systems and molds on the surface of wood planks were collected and air samples taken from a sister plant. blood samples, spirometry, and symptoms' questionnaires were obtained from 11 co-workers. Dense paecilomyces growth was observed on the surface of the dried processed wood in the index plant. This fungal genus was not detected in the sister plant. An additional worker had symptoms suggestive of HP, and his bronchoalveolar lavage revealed a lymphocytic alveolitis. The 3 confirmed cases of HP and the other 10 workers had positive specific IgG antibodies to paecilomyces. We report 3 cases of HP out of 13 workers and a 100% sensitization to molds in workers of a hardwood processing plant. This rate is much higher than what is commonly seen in other environments associated with HP. The drying process is suspected of being responsible for the massive paecilomyces contamination likely responsible for the HP.- - - - - - - - - - ranking = 11keywords = plant (Clic here for more details about this article) |
3/12. sirolimus-induced pulmonary hypersensitivity associated with a CD4 T-cell infiltrate.The differential diagnosis of pulmonary infiltrates after solid-organ transplantation presents a broad differential diagnosis including opportunistic infections and drug-induced lung disease. We report an adult liver transplant recipient who had breathlessness and pulmonary infiltrates following the introduction of sirolimus, and in whom transbronchial biopsy demonstrated a granulomatous interstitial pneumonitis and an organizing pneumonia with a CD4 T-cell infiltrate suggesting a T-helper cell-associated reaction to a processed sirolimus protein complex. Withdrawal of sirolimus produced a rapid clinical and radiologic improvement. This case indicates that with the increasing use of sirolimus, clinicians need to be aware of pulmonary hypersensitivity from this agent.- - - - - - - - - - ranking = 2keywords = plant (Clic here for more details about this article) |
4/12. Diphenylmethane diisocyanate hypersensitivity pneumonitis: a serologic evaluation.We describe the clinical and immunologic evaluation of a steel plant maintenance supervisor who had clinical symptoms consistent with hypersensitivity pneumonitis. No antigen was obvious but after a thorough occupational history and review of the industrial hygiene data, the most likely antigen appeared to be diphenylmethane diisocyanate. Precipitating antibodies were not detected in the worker's serum; however, significant antibody levels of IgG specific for diphenylmethane diisocyanate-human serum albumin were detected by other immunoassays. This case highlights the importance of a thorough occupational history and an aggressive laboratory immunologic evaluation in identifying the offending agent in a worker with hypersensitivity pneumonitis. hypersensitivity pneumonitis due to an inhaled reactive chemical may be present without precipitins demonstrated in vitro due to the nature of the haptenized chemical protein conjugate or the concentration of IgG antibody.- - - - - - - - - - ranking = 1keywords = plant (Clic here for more details about this article) |
5/12. cheese worker's hypersensitivity pneumonitis.A patient employed in a plant where blue cheese was manufactured developed hypersensitivity pneumonitis to Pencillium roqueforti. Symptoms of cough, dyspnea, and malaise, and findings of bibasilar crackles, reduced lung volumes, hypoxemia, and bilateral infiltrates on chest roentgenogram, resolved after she left the workplace. bronchoalveolar lavage revealed a high percentage of lymphocytes. Antibody to P. roqueforti was demonstrated in serum and lavage fluid. To our knowledge this case represents a new occurrence of hypersensitivity lung disease in the cheese manufacturing industry in the united states.- - - - - - - - - - ranking = 1keywords = plant (Clic here for more details about this article) |
6/12. The role of gallium-67-citrate in the detection of phenytoin-induced pneumonitis.A patient with a history of cardiac transplant presented with a fever of undetermined etiology. The patient had been on multiple medications, including phenytoin, which can occasionally cause allergic or hypersensitivity pneumonitis. A chest x-ray and CT scan of the chest revealed no active disease. A 67Ga study was obtained after intravenous administration of 377.4 MBq (10.2 mCi) of 67Ga-citrate. The images showed diffuse intense lung uptake bilaterally. Bronchoscopic biopsy revealed hypersensitivity pneumonitis. phenytoin was withdrawn and corticosteroid was started in therapeutic doses. A follow-up gallium study obtained 25 days after the baseline demonstrated marked improvement in the lungs with concurrent clinical recovery. This case illustrates the usefulness of 67Ga in the detection of drug-induced pneumonitis and in the follow-up of response to therapy.- - - - - - - - - - ranking = 1keywords = plant (Clic here for more details about this article) |
7/12. biopsy-confirmed hypersensitivity pneumonitis in automobile production workers exposed to metalworking fluids--michigan, 1994-1995.In 1994, union and management officials and local physicians in southeastern michigan noted the occurrence among automobile production workers of respiratory illness consistent with hypersensitivity pneumonitis (HP). Local and national health authorities reviewed medical records, and in June 1994, individual employees and the union requested that CDC's National Institute for Occupational safety and Health (NIOSH) evaluate potential occupational exposures associated with these illnesses. This report summarizes preliminary findings of the evaluation, including detailed information about one HP case and a summary description of the six biopsy-confirmed cases among automobile production workers from three different plants (plants A, B, and C) in southeastern michigan; all six workers had jobs that entailed frequent exposure to metalworking fluids (MWFs). The findings suggest the need for further evaluation of a possible association of occupational exposure to MWFs with HP.- - - - - - - - - - ranking = 2keywords = plant (Clic here for more details about this article) |
8/12. hypersensitivity pneumonitis-like reaction and occupational asthma associated with 1,3-bis(isocyanatomethyl) cyclohexane pre-polymer.Twenty-three of 34 workers who had worked in the injection molding operation making polyurethane foam parts at an automobile parts manufacturing plant developed respiratory symptoms and/or systemic symptoms over a 2-month period following the full production use of a new diisocyanate paint that contained 1,3-bis(isocyanatomethyl)cyclohexane pre-polymer (BIC)(CAS #75138-76-0, 38661-72-2). At 3 months, all subjects underwent an interview, physical examination, pre- and post-shift pulmonary function tests, and either methacholine challenge test or bronchodilator challenge at an occupational health clinic. The most frequently cited symptoms were dyspnea (65%), cough (61%), chest tightness (57%), chills (57%), wheezing (30%), and myalgias, arthralgias, and nausea (26%). Thirteen subjects had either a positive methacholine challenge test or a positive response to bronchodilator challenge, making the overall prevalence of airway hyperresponsiveness 38%. The overall prevalence of hypersensitivity pneumonitis-like reactions among line operators in the injection molding process was 27%. This disease outbreak suggests that 1,3-bis(isocyanatomethyl)cyclohexane pre-polymer may cause asthma and hypersensitivity pneumonitis-like reactions. The use of BIC was discontinued 6 months after the first workers developed symptoms.- - - - - - - - - - ranking = 1keywords = plant (Clic here for more details about this article) |
9/12. The clinical spectrum of humidifier disease in synthetic fiber plants.In a synthetic fiber production site with recirculating cold water humidification systems and small-size-particle (> 0.1 mu < 1 mu) oil mist exposure, humidifier disease was diagnosed in several workers. The patients could be divided into three groups illustrating the clinical spectrum of humidifier disease: humidifier fever (toxic inhalation fever) (12 patients): an asthma-like syndrome (8 patients); and allergic alveolitis (4 patients). Natural challenge at the work place, monitored by parameters such as peak-flow, spirometry, blood leucocyte count, and body temperature, provided important diagnostic information. In patients with chronic allergic alveolitis, a gradual recovery during an exposure-free period indicated a work-related causation, more than changes during challenge in normal work. In some patients, the fungus sporothrix schenckii, hitherto unknown as a sensitizer, may have been at least one of the causative antigens. Measured levels of viable fungi (< or = 100 CFU/m3) and endotoxin (64 pg/m3) in air samples were much lower than those at which health effects usually are reported. Small-size-particle oil mist exposure may have underestimated the exposure to microorganisms, but otherwise an adjuvant role to this type of co-exposure might also be postulated. In contrast to allergic alveolitis, the asthma-like syndrome appeared to be more common in patients with a history of atopy and of smoking.- - - - - - - - - - ranking = 4keywords = plant (Clic here for more details about this article) |
10/12. Allergic alveolitis following exposure to epoxy polyester powder paint containing low amounts (<1%) of acid anhydrides.Only one case report concerning allergic alveolitis caused by polyester powder paint has been published previously. The aim of this study was to determine whether phthalic anhydride (PA) or trimellitic anhydride (TMA) is the alveolitis-causing agent in such paint. A 61 year old woman showed recurrent symptoms of chills, cough, and fever whilst at work. She was working in a plant where epoxy polyester powder paints were used to paint metal. The paint was found to contain low (<1%) amounts of TMA and PA. The patient showed shadowing on chest radiographs. In bronchoalveolar lavage, lymphocytosis (67%) and a low T-helper/T-suppressor ratio (0.2) were found. transfer factor was within normal limits, but a slight reduction was verified after re-exposure to the paint. The symptoms, exposure, reduction in transfer factor, findings on chest radiographs and bronchoalveolar lavage were consistent with allergic alveolitis. In conclusion, the polyester powder paint used in the plant caused allergic alve olitis in this patient. Of the constituents in the paint, trimellitic anhydride and phthalic anhydride were the possible causative agents.- - - - - - - - - - ranking = 2keywords = plant (Clic here for more details about this article) |
| | Next -> |